How To Crack Dstv Channels Packages

Use the TV guide to find out what's on DStv. Find TV shows on your DStv package, see what's hot or get a full list of DStv channels. Jan 25, 2010 - If I 'hack' DSTV and don't pay I won't get the DSTV magazine anymore:(. Channel that is normally not accessible on the normal dstv bouquet.

For starters, I would never even attempt to try or buy into something like this. The reason for me being so enquiring about this issue is that I went to a bar(which I prefer not to reveal) and a few signals gave me the indication that they are running a jippoed subscription. Up until then I thought that this was not possible since DSTV implemented new technology. I just wanted to confirm whether this is still happening out there.

If u were to be sitting in a bar / and office / or at someone's house, how would you know that they are running a legitamate DSTV subscription (without asking)? I get the feeling that some people have illegal subscriptions but will not reveal it.

All the spare wires just tape them off in side the 4 pin plug as a side note the jcd201m mic it does go though battery's if not using the self power option from the rig (in your case there is no power feed on the galaxy plug) so remember to turn the mic off each night! PTT earth pin 3 of 8 pin is connected to pin 1 of 4 pin you will notice that both the shield (pin 1 of 8 pin (gray/grey) and the white wire (pin 3 of 8 pin )are both connected to pin 1 of the 4 pin plug.that is because in that chassis radio the ptt and audio earth are shared on the same pin. Audio is connected to audio (pin 2 of 8 pin to pin 2 of 4 pin) AUDIO earth (shield ) is connected to earth (pin 1 of 8 pin to pin 1 of 4 pin). Jcd-201m base microphone manual. If the time out timer (TOT) annoys you pm me and i will send you the mod to disable it (a wire link in the mic). The thing that must stay standard is the shield connects to the audio earth and the shielded wire is the audio wire (if not then there will be rf feedback/hum issues.) ok down to the nuts and bolts of your problem wire as below the only things that matter to you is that tx is connected to tx(pin 4 of 8 pin to pin 3 of 4 pin).

No: 9 Exit once to go back to the 'Dish Installation' menu Select 'Scan All Networks' Your decoder will go into scanning mode and might take a while to scan all 9 networks. Do not interrupt the process even if it seams to take longer than you expected!

Once completed, your picture will return as normal To access you public channels, press the 'TV button' on your remote control. The 'Bouquet Options' menu will appear.

Select 'Public PAS7/10' Pressing any of the arrow buttons on your remote, will open the screen with all the available Free to Air channels. Simply select the channel you wish to view and press ok to tune. To access the radio channels, simply select the 'music note' on your remote (while still on Public PAS7/10 bouquet) and select which channel you would like to listen.